Openwrt guest network

Openwrt guest network смотреть последние обновления за сегодня на .

OpenWRT - Setup Guest WiFi

6376
120
47
00:09:19
11.02.2021

In this video, we will setup guest WiFi on OpenWRT LuCI. It consits of creating guest network interface, wireless client isolation and firewall zone configuration. The purpose of Guest WiFi is to create an open wireless network independent from the main WLAN. At the same time, it will provide internet connectivity to guest clients and restrict LAN connectivity (for example, devices in guest network will not be able to access LuCI or other devices in your main LAN network) Video timeframe: 00:00 - OpenWRT Guest WiFi Introduction 00:30 - Guest network interface creation on LuCI 02:04 - Guest wireless configuration - attach guest interface and client isolation 03:27 - Guest Firewall zone configuration & Traffic rules 06:18 - Assign multiples wireless radios (interface) to the guest network 07:00 - Result and Tests - If you want to setup the guest WiFi using CLI, there is the link to the document: 🤍 - Other OpenWRT tutorials: 🤍 Thanks for watching and Happy Lunar New Year!

OpenWRT 21.02 - Setup Guest WiFi

2938
97
37
00:12:03
14.11.2021

In this video, we will setup guest WiFi on OpenWRT 21.02 with LuCI (no SSH or CLI required). The process consits of creating guest network interface, wireless client isolation and guest firewall zone configuration. The purpose of Guest WiFi is to create an open wireless network independent from your LAN/WLAN. Devices in the Guest network can only access the internet and won't be able to communicate with devices in your internal network (LAN) and the router management IP (LuCI/SSH). Video timeframe: 00:00 - OpenWRT 21.02 Guest WiFi Introduction 00:59 - Create Guest network interface on LuCI 03:22 - Configure Guest wireless interface 05:04 - Configure Guest firewall zone (Network - Firewall) 06:19 - First connection test (no IP address received) 06:57 - Configure Firewall rule to allow DHCP & DNS from Guest zone 08:24 - Second connection test (successful) 10:13 - Block all other traffic from Guest WiFi to the router Resources: - Guest WiFi OpenWRT 19.07 - 🤍 - Guest WiFi Basic CLI script - 🤍 Good luck and see you in the next video!

How to configure OpenWrt as Firewall for your home network and Guest Wifi and IPTables explained

41362
1370
179
00:13:34
15.02.2021

Guest Wifi in your home network can easily be done with OpenWrt. How to configure OpenWrt as Firewall, how to build a firewall for your home network, How to make a Guest Wifi and a separate IOT Wifi and Firewall zone ? IPTables explained in the middle part. 0:00 Intro 0:48 Creating the IOT and Guest Firewall zones 1:32 Explaining the desired setup (IOT/LAN/GUEST) 2:20 Firewall zones in OpenWrt / Luci 2:35 IPTables explained 5:10 Setting the policies in the OpenWrt Interface 7:59 DNS and DHCP for the guest network 9:15 Masquerading and NAT, private IP addresses 10:17 adding and assigning the interfaces 11:48 adding the wireless interfaces 12:42 summary Please support me on patreon: 🤍 My youtube channel: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍

extend a guest wifi on second access point with OpenWrt using VLANs

20198
584
161
00:13:56
01.03.2021

In this episode we will extend a guest wifi in our home network as well as the IOT SSID and the LAN SSID which we have defined in the first episode to a second access point with OpenWrt using VLANs. Rather than setting up the second OpenWrt router as a fulll router, we will set it up as a so called "dumb access point" and extend the LAN, IOT and Guest networks over one single cable by defining a tagged VLAN port on both switches. 0:00 recap, intro 0:33 checking the main router 1:04 what we want to achieve 1:48 adding ethernet interfaces 2:12 can it be achieved with routing only ? 3:28 solving the problem with VLANs 4:00 adding the VLANs in luci for Guest, IOT and LAN 5:30 bridging Wi-fi and Ethernet on the main router 6:20 connecting Router and access point with untagged VLANs (3 cables) 7:05 How to use one single cable instead of three ? 7:20 tagging / trunking explained and implemented 8:50 setting up the Access point 9:40 Testing 11:05 little cosmetic change : unmanaged and managed Switches, tagging or trunking the ports 11:50 unmanaged switch - mixing source port (untaged) and trunk port (tagged) on one Ethernet port 12:45 recap The first episode is here: 🤍 Another episode that deals with VLANs: 🤍 Please support me on patreon: 🤍 My youtube channel: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍

OpenWRT 21.02 - Guest Network & Extended with Dumb AP/Router

2138
60
36
00:12:24
28.11.2021

In this video, we are going to setup Guest LAN network on OpenWRT router. And then, we are going to extend this guest Network with a Dumb AP/Router. As a result, you will have a second network for your guest or IoT devices that works independently and won't be able to connect to the main LAN/OpenWRT management interface. For this setup, I used the Linksys WRT1900AC as the main router with LAN port 1 was configured as Guest LAN port. The Dumb AP is actually the Xiaomi CR6608 router, with DHCP disable and it was connected to the WRT1900AC by the LAN port. Video timeframe: 00:00 - Introduction & Devices Overview 00:59 - Guest LAN & Guest WiFi on OpenWRT 19.07 01:30 - Create the Guest LAN Interface 04:06 - Configure the Guest LAN Firewall 06:48 - Connect Main router to Dumb AP/Router 07:28 - First test 09:08 - Create Firewall rule to block access to LuCI & other traffic 10:13 - Final test 11:21 - Create guest WiFi attached to the Guest LAN Resources: OpenWRT 19.07 Guest WiFi - 🤍 OpenWRT 19.07 Guest LAN - 🤍 OpenWRT 21.02 Guest WiFi - 🤍 Thanks for watching and see you!

OpenWRT - Setup Guest LAN

2486
36
8
00:10:19
18.02.2021

In this video, we will setup guest LAN on OpenWRT LuCI. I will show you how to create the VLAN on the Switch page, create the guest network interface and configure the firewall zone. Devices in Guest LAN will have access to the internet, but it will not be able to access LuCI or other devices in your main LAN network (LAN isolation). You connect a switch to the Guest LAN network port and extend it. - If you are looking for Guest WiFi tutorial, here is the link to it: 🤍 - If your router has multiple network interfaces (eth0, eth1, eth3) or it is an x86 PC, each of the network interface will a physical interface, so there will be no VLAN creation. Video timeframe: 00:00​ - OpenWRT Guest LAN Introduction 00:25 - Router and network ports overview 01:35​ - Create new VLAN for Guest LAN on LuCI 03:00​ - Create new network interface for Guest LAN on LuCI 04:52​ - Guest LAN Firewall zone configuration & Traffic rules 07:40​ - Result and Tests Check out the OpenWRT tutorial playlist: 🤍 Thanks for watching and see you again!

OpenWRT - Captive Portal - WiFi Splash Page

9413
127
32
00:16:11
13.03.2021

In this video, we will setup WiFi Captive Portal / Splash Page on OpenWRT. This is also known as WiFi marketing. There are wide ranges of packages which can be used to setup the captive portal, and I am going to use OpenNDS. Video timeframe: 00:00 - OpenWRT Captive Portal with OpenNDS Introduction 00:55 - Captive Portal Detection - How OpenNDS work 02:30 - Install OpenNDS on OpenWRT 04:44 - OpenNDS configuration file overview 07:58 - Test OpenNDS captive portal on smartphone 09:48 - Modify the OpenNDS splash page & configuration file 12:44 - Final test and moving on Resources: OpenWRT Captive Portal - 🤍 OpenNDS - 🤍 OpenWRT Guest WiFi - 🤍 Thanks for watching!

How to Create a VLAN - A Beginner's Guide // OpenWrt Router

22563
510
136
00:09:59
21.05.2021

Welcome back to Dev Odyssey Home Networking! In this episode I break down VLANs with a example, and demonstrate how to set up your own VLANs using OpenWrt on my Netgear R6080. VLANs have many benefits, notably, creating multiple networks that let you control which networks your devices connect to, and therefore securing them by separating out personal devices, guest devices, and risky smart devices. Once you know how to create VLANs, you can make your own virtual networks for all the devices in your home network. This video was recorded using the following versions of OpenWrt and LuCI: OpenWrt SNAPSHOT r15838-d2d32dcd5f (19.x) LuCI master 21.124.24916-0faf9a4 00:00 Intro 00:20 What are VLANs 00:36 VLANs Explained 02:51 VLAN Advantages 03:22 VLAN Requirements 03:43 Creating a VLAN 08:00 Connecting to VLAN using Ethernet 08:38 Connecting to VLAN over WiFi 09:27 Outro Video Outline VLANs - Virtual Local Area Network (LAN) VLANs are virtually / logically separated, not physically like regular LANs VLANs are defined by the 802.1q protocol. VLAN Diagram VLAN Advantages 1. Create multiple virtual networks 2. Create special purpose networks for guest users, smart devices, video surveillance and media streaming servers like Plex VLAN Requirements 1. Physical Interface (Ethernet or WiFi) 2. VLAN ID (1 - 4094) 3. Name 4. Priority (0 by default, meaning Best Effort) OpenWrt VLAN Demonstration - create a VLAN, and connect to the VLAN over Ethernet port and WiFi Other Dev Odyssey Network Videos: How to Connect 2 Routers on the Same WiFi Network - 🤍 What is a WAN Port On A Router? - 🤍 Home Networking Playlist 🤍 Network Security Playlist 🤍 Music Attribution Above by Limujii 🤍 Creative Commons — Attribution 3.0 Unported — CC BY 3.0 Free Download / Stream: 🤍 Music promoted by Audio Library 🤍 Icon Attribution 🤍 Icongeek26 from 🤍 🤍

OpenWRT - WAN & LAN on Single Network Interface device with VLAN

18867
249
97
00:10:04
05.10.2020

In this tutorial, we are going to setup OpenWRT with a single ethernet port device. Since there is only one physical network interface, we will setup 2 VLANs for WAN and LAN with a switch that supports VLAN - TP Link TL-SG108E. (Please read the below description) / If you have any problem with WAN connection, please try to change Port 1 (to the ISP router) on the switch from tagged to untagged \ This tutorial should work with any single NIC, such as x86 PC, Raspberry Pi, Nano Pi and Orange Pi, etc. Summary about the setup: We will use VLAN 1 for our LAN devices to minimize the configuration. VLAN 10 will be setup for WAN interface with DHCP protocol. On the switch, port 1 is connected to the ISP router with port 1 tagged VLAN 10. Switch port 2 will be connected to the OpenWRT router, it is tagged with VLAN 10 as well. Port 3 to 8 will be used for LAN devices. Port 2 to 8 is untagged with VLAN 1. A tagged port is also know as a Trunk-Port and an untagged port is also know as an Access-Port Video timeframe: 00:00 - Introduction about running OpenWRT on single network port device 00:35 - Network diagram and devices physical connection 04:00 - Configure 802.1Q VLAN for WAN and LAN on TL-SG108E 06:55 - Create network interface with VLAN ID on OpenWRT Luci 07:55 - Check and final words Check out other OpenWRT tutorials on my channel. If there is anything not clear or there is any question, feel free to leave it in the comment section and we will discuss. As always, please like, share and subscribe to the channel to support me. Thank you!

CHEAP WI-FI MESH ALTERNATIVE with fast roaming OpenWrt Wi-Fi Access points

65212
2199
365
00:21:16
23.11.2020

Please visit my channel page: 🤍 Want to talk to me? Join my Discord Server: 🤍 multiple wi-fi access points might be a cheap wi-fi mesh alternative if they are configured correctly. With openwrt wi-fi can be configured for fast roaming or fast BSS transition or 802.11r. In this HOWTO we configure a router as access point vs. mesh using OpenWrt fast roaming. This will allow us to seamlessly move between access points while we move across the house. OpenWrt fast roaming hplus the right channel configuration help to get excellent WIFI coverage in the whole house, even despite my concrete walls. 0:00 Walking through the house with iperf 1:51 Do people want MESH ? 3:30 high level architecture overview 5:00 Wi-Fi channels configuration in my house 6:43 Marc's BUNKER 7:35 Wi-Fi Roaming explained 9:04 the challenges with roaming 10:00 Configuring fast roaming on the first router 11:44 Other access points, avoid time consuming tasks 12:18 configure OpenWrt as Access point only 16:47 Success! 17:45 CALL TO ACTION 18:53 testing Wi-Fi performance with iperf3 20:06 speedtest.net, conclusion, closing Marc's channel on youtube: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍

OpenWRT for beginners - Full basic configuration video tutorial

108318
966
165
01:03:37
10.07.2020

[ENG sub available] In this video, we are going to walkthrough the basic of OpenWRT, how to install OpenWRT on your router and some of the basic configuration, such as PPPoE connection, AP client and how to revert back to the original firmware. Check out other OpenWRT tutorials: 🤍 Video timestamp: 00:00 - Introduction to OpenWRT 00:50 - Reason to use OpenWRT 02:00 - Device selection guide for OpenWRT 03:10 - Download firmware and install OpenWRT 08:33 - Access OpenWRT GUI (LuCI) 11:58 - Wireless configuration - OpenWRT AP set up 15:32 - Set up a PPPoE connection with OpenWRT 20:12 - Port forwarding and Static IP on OpenWRT 23:45 - Change OpenWRT's LAN IP address 27:49 - OpenWRT as AP client 31:29 - Rollback OpenWRT to the original firmware 36:17 - Update OpenWRT via the web interface 40:28 - Install LuCI App Statistics - Network Graph Monitoring 52:50 - Final words 53:20 - Next tutorial preview - Build your own OpenWRT Check out OpenWRT's document: 🤍 Table of hardware - firmware download: 🤍 Luci-app-statistics: 🤍 Back to original firmware: 🤍 Due to English is not my native language, there may be grammar or pronunciation problems. If there is anything not clear or there is any question, feel free to leave it in the comment section and we can discuss. If you see the video is helpful, please like, share and subscribe to the channel to support me. Thank you!

Install OpenWRT 21.02 & DSA VLAN Configuration for WAN Interface

7624
99
77
00:13:14
16.09.2021

The first stable release of the OpenWRT 21.02 stable series is now available. It comes with a lot of new changes, for example WPA3, TLS, HTTPS and initial DSA support for some of the targers, including ath79, mvebu and ramips (mt7621). At the same time, the Switch page had been removed and we need to configure VLAN on Network - Interfaces - Devices Tab. In this video, we will install OpenWRT 21.02 on the Linksys WRT1900AC. After that, we will configure the WAN interface in DHCP client mode on VLAN 30. You can follow this tutorial to configure PPPoE with VLAN on OpenWRT 21.02, all you need to do is change the Protocol of the WAN interface to PPPoE, instead of DHCP. Video timeframe: 00:00 - Highlights in OpenWRT 21.02.0 01:12 - Download Firmware & Upgrade from OpenWRT 19.07 04:41 - Linksys WRT1900AC OpenWRT 21.02 walkthrough 08:50 - Configure VLAN for WAN interface 11:40 - Speedtest & CPU usage Resources: Install OpenWRT 19.07 on Linksys WRT1900AC - 🤍 OpenWRT 21.02.0 Release Note - 🤍 Mini DSA Tutorial - 🤍 Converting to DSA - 🤍 Linksys WRT1900AC - 🤍 Thanks for watching and see you the next video!

VLANs in OpenWrt 21

26283
748
207
00:28:27
21.12.2021

The VLAN Konfiguration has changed in OpenWrt 21.02 - Bridge VLAN Filtering and Distributed Switch Architecture (DSA) change the way we configure the network segmentation in a Guest, IOT and LAN Network. 00:00 Intro 00:58 TLDR – Chapter overview 01:15 Recap VLANs 04:24 Recap Version 19 08:13 Version 21 – 802.1Q VLANs 08:51 implicit/explicit configuration 10:53 Version 21 - DSA and bridges 12:12 Bridge VLAN filtering 16:07 egress/ingress/tagged/untagged explained 20:50 adding Wi-Fi to a VLAN 22:04 configuring a 2nd access point 24:30 Best practices and tips Related videos: Extend a Guest Wi-Fi to a second accesss point 🤍 Configure the Firewall on OpenWrt 🤍 Wi-Fi Fast Roaming 🤍 Build a managed switch with OpenWrt 🤍 Commands I type or use: cd /etc/config cp network network.bak opkg update opkg install diffutils while true; do clear ; diff network network.bak ; sleep 1 ; done to check if IP4 forwarding is active: cat /proc/sys/net/ipv4/ip_forward (0: not active, 1: active) to disable forwarding (does not survive reboot): echo "0" (gt) /proc/sys/net/ipv4/ip_forward (replace (gt) with the "greater" sign) to survive reboot: add net.ipv4.ip_forward=0 into the /etc/sysctl.conf file The Linux Kernel DSA Documentation is here: 🤍 Please support me on patreon: 🤍 My youtube channel: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍 music on / Lizenzfreie Musik von 🤍

D-Link DIR-885L LEDE/OpenWRT (Part 3) - Setup Guest WiFi Zone

6308
00:05:31
24.02.2017

D-Link DIR-885L-A1 LEDE (~OpenWRT) Setup Guide (Part 3) - Guest WiFi Zone Dual-Band AC3100 Ultra WiFi Router BCM4709C0 2Cores CPU 🤍1.4GHz Part 1 : 🤍 Flash from stock to LEDE (via Recovery Mode), basic setup, UniFi's Internet (Vlan.500) & IPTV (Vlan.600) Part 2 : 🤍 Install packages including Smart Queue Management (SQM) QoS, Wireless setup, Bufferbloat & Jitter/Ping tests Part 3 : 🤍 Setup Guest WiFi Zone (without LAN access)

ToorCon XX — RIDICULOUS ROUTER: Using OpenWRT to do all the enterprise stuff 2 - Gene Erik

14302
200
9
00:19:33
27.11.2018

OpenWRT is stable on many cheap platforms. It does so many things. The power provided by modern embedded device can sometimes give commercial hardware a run for its money, especially in the SoHo environment. This talk discusses uses a moderately prices home router to provide most of the features you might want in a network: Enterprise WiFi, VPN (outbound AND inbound), network segmentation, redundancy, multi-wan, dynamic routing. Do a lot with a little.

OpenWrt 21.02 DSA Switch config - VLAN and Bridging (english)

1876
61
2
00:14:05
23.12.2021

0:30 About DSA in OpenWrt 1:27 configuration example VLAN filtering 8:30 same scenario without VLAN filtering 11:18 example Access Point config After I made a German video about the new DSA Switch config in OpenWrt I've been meaning to make on in English, too. This is the German version: 🤍 Eversince OpenWrt released version 21.02 they introduced DSA (Distributed Switch Architecture) which is a breaking change and also gives new possiblities like VLAN Filtering / VLAN aware Bridges. The configuration method and the wording (devices / interfaces) also changed. I'm showing how Bridges and VLAN can be set up, at first with a VLAN aware bridge and secondly with a dedicated Bridge for each VLAN. The latter is more hassle. I'm also showing a real life example of an Access Point running OpenWrt 21.02 with a VLAN Filtering Bridge and SSID connected to specific VLANs. To see if your device will run DSA, watch: 🤍 I'm showing only few examples, for more look at: 🤍 If you're upgrading from Version 19.07 and your devices uses DSA you need to migrate manually. I reinstalled my devices, here a converting guide: 🤍

OpenWRT - Install Netdata - Real Time Monitoring Dashboard

15176
219
42
00:07:31
31.12.2020

Netdata is a highly optimized Linux daemon providing real-time performance & monitoring for Linux systems, including OpenWRT. The dashboard will show us the CPU usage, inbound and outbond traffic for each of the network interfaces, connections going throgh the firewall and, etc. In this video, we will install netdata agent on OpenWRT router. We will learn how to install the package with LuCI and access the GUI. We can also install it with CLI with opkg update && opkg install netdata Video timeframe: 00:00 - Netdata Realtime Network Monitoring Introduction 00:56 - Install Netdata with LuCI 02:19 - Access Netdata GUI on OpenWRT & Dashboard Overview 05:43 - How to remotely access Netdata GUI from the internet 07:02 - Final words Learn more about Netdata: 🤍 Netdata OpenWRT package: 🤍 Feel free to check out other unbox videos & tutorials on my channel. If there is anything not clear or there is any question, please leave it in the comment section and we will discuss. A small group on FB, join if you want to say hi: 🤍 As always, please like, share and subscribe to the channel! Thank you!

WIFI-MESH with OpenWrt

6444
414
109
00:21:17
12.01.2022

We will build a DIY 802.11s Wi-fi mesh with OpenWrt and two cheap commodity consumer routers using fast roaming 802.11r. Please use my affiliate links if you want to buy them: Archer C7 : 🤍 Xiaomi: 🤍 Xiaomi Aliexpress 🤍 The scripts for automatic deployment are on my github repository: 🤍 0:00 Let's build a cheap Wi-Fi mesh 0:30 Preparations 01:00 Config 1st Router 01:45 Software (wpad mesh) 04:50 Mesh Wifi settings 07:00 Turn 2nd Router into dumb AP 12:30 Config 2nd Router 13:20 Test Mesh connectivity 15:07 Turn both into Access points 17:25 Why did I chose 2.4 GHz? 19:00 Troubleshooting Marc's channel on youtube: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍 music on / Lizenzfreie Musik von 🤍

OpenWRT - 802.11s Mesh WiFi Network

16660
242
58
00:20:30
28.03.2021

In this video, we are going to setup an 802.11s Mesh WiFi network with OpenWRT using Luci. 802.11s is an open-source standard for connecting devices wirelessly, it is working on Layer 2 of the OSI model. All the nodes in the Mesh network can see each other as if they are all connected to the switch. Please enable 802.11r Fast Transition during the AP setup OpenWRT handles this very well with wpad-mesh-opensslWe will create a Mesh connection between the Habanero DVK and the D-Link DIR-842, and configure Wireless Access Point (WiFi) so that devices connected to the AP can roaming when moving from one place to another. If you don't need to connect the 2 routers wirelessly, you can check out the 802.11r Fast Roaming, where we connect these routers with an ethernet cable. With OpenWRT installed, we can setup a Mesh network using devices from different vendors, for example: Mikrotik, D-Link, TP-Link, 8devices, etc. as long as the WLAN hardware supports Mesh. Video timeframe: 00:00 - 802.11s based wireless mesh network & connection overview 02:40 - Check if your WLAN hardware support Mesh 03:59 - Install package - wpad-mesh-openssl 06:47 - Setup the Mesh connection on the Main node - Habanero DVK 08:40 - Setup the Mesh connection on the Second node - DIR 842 11:03 - Check if the Mesh connection is up 12:04 - Configure WiFi Access Point on the 2 routers (node) 16:11 - Connection & Roaming Test 19:40 - Conclusion and moving on - Fast Romaing Resources: OpenWRT WiFi Roaming - 🤍 OpenWRT guide 802.11s - 🤍 Thanks for watching and see you all in the next video!

Old Router As SDR Server With OpenWrt

53
4
2
00:04:51
14.01.2022

Bring new life to that old WiFi router that you have laying around and use it as a SDR server that you can access from anywhere! My Router: TP-Link TL-WDR3500 v1 Putty/Startup script command: rtl_tcp -a 192.168.1.1 -n 8 -b 8 Links: 🤍 🤍 🤍 Chapters: 0:00 Intro 0:13 OpenWrt Setup 2:01 Port Forwarding 2:52 Putty Setup 3:17 SDR Console Setup 3:49 Tests 4:04 Hardware 4:14 Startup Script 4:39 Outro Music was provided by progameing & Patrick Patrikios

Building a managed switch with OpenWrt on old Wifi Router

23427
591
73
00:17:19
13.04.2020

Please visit my channel 🤍 We are using OpenWRT to build a managed switch with VLAN functionality from a scrap Wifi Router (D-Link DIR-600) - in the second part of the video we will enable wifi and see how we can bridge Wifi interfaces into a VLAN on OpenWrt. You can still use your old Wifi Router as a switch - separate LAN segments with VLANs. You can separate and/or extend your network over multiple Wifi Access points, for example extend your guest network using a second Access point on or behind the managed switch by mapping the right VLAN. Rather than throwing the router away use it as a diy managed switch. Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍 Licence-free music on / Lizenzfreie Musik von 🤍

OpenWrt Setup Guide

39282
342
85
00:11:04
11.07.2020

Getting started with OpenWrt, in this video we cover the basics of logging in, setting a password, configuring wireless as a client bridge and an AP (Access point) securely. For more in-depth info and troubleshooting help please check out our blog post: 🤍 Please comment below if you have any questions and like and subscribe if you enjoyed this content! You can also find us at: Discord: 🤍 Twitter: 🤍 Website: 🤍 Our Channel: YouTube.com/user/TheHoddy89 Chapters: Intro: 00:00 Login: 01:30 Passwords: 02:11 Wifi: 03:42 Troubleshooting: 09:35 Outro: 10:05

Intro to OpenWRT by Ronaldo Nunez

1972
44
5
00:46:20
07.08.2020

Embedded Meetup Egypt is delighted to introduce an intro about OpenWRT. The Meetup is introduced by Eng. Ronaldo Nunez Introduction: OpenWRT (OPEN Wireless RouTer) is an open source project for embedded operating systems based on Linux, primarily used on embedded devices to route network traffic. Prerequisites: - Basic Knowledge about Embedded Linux The video timeline: 00:02:02 Overview about OpenWRT 00:09:27 Core libraries and services of the OpenWRT system 00:31:12 Build steps of the OpenWRT image for a specific board. You can also support Embedded Meetup Egypt on Patreon through the link below: 🤍

DD-WRT Tutorial - How to create a separate public guest network that works!

134809
553
69
00:09:14
25.10.2012

This video shows how to create a secured private wireless network and a separate public guest network (with internet connectivity) on a Linksys WRT54GL router using DD-WRT firmware. This video is a bit old. New problems are occurring because of differnent versions of DD-WRT. I am using DD-WRT v24-sp2 (10/10/09) std, (SVN revision 13064). This tutorial is for use with this version. Also, as people have stated in comments, in QOS the bandwidth must be set to 90-95% of your internet connection speed. This is not shown in the video! Please keep in mind that although you can use DD-WRT on many routers, not all of them will broadcast the SSID of the guest network. The WRT54GL will. Please also keep in mind that throughout this video, EVERYWHERE I enter 192.168.0.1 you will need to use 192.168.1.1. This is extremely important.

OpenWRT - Bandwidth Limiting for LAN & WiFi - SQM QoS

11087
143
32
00:12:40
17.01.2021

In this video, we are going to control the bandwidth of LAN and WiFi by configure rules in OpenWRT SQM QoS. It is also know as "bandwidth limit per interface". We will create 2 different LAN interfaces, each of them will have different download & upload speed. Also, we will apply a rule to Wireless interface, which normally is wlan0 and wlan1(if you have 2 wireless radios). If you haven't watch the previous video about SQM QoS, please take a look on it. Else, you can just install "luci-app-sqm" and proceed with this video. One of the big difference while setting up the speed limit for LAN interfaces is that the Upload speed shown in SQM QoS GUI is actually the Download speed and vice versa. Please do not confuse on that. Video timeframe: 00:00 - Introduction: Setup Speed Limit for LAN and WiFi on OpenWRT 01:20 - Create new VLAN interface (to control the speed limit) 02:30 - Switch port VLAN overview 03:03 - Create new LAN interface 05:27 - Configure LAN & WiFi Download/Upload speed limit in SQM QoS 07:40 - LAN Speedtest after SQM QoS rules applied 09:26 - WiFi Speedtest after SQM QoS rules applied 10:18 - Additional Information & tunning Resources: SQM (Smart Queue Management) - 🤍 Lazy to read? SQM Lite version - 🤍 QoS (Network Traffic Control) - 🤍 OpenWRT Traffic Shaping - 🤍 Linux Traffic Control - 🤍 Thank for watching and see you in the next video!

How to build a virtual home network with OpenWrt in Virtualbox

55005
1295
120
00:36:10
20.10.2020

Please visit my channel 🤍 Using Virtualbox we build a virtual home network with two OpenWrt Routers, a Linux VM and a Windows VM and a LAN and a WAN. You can use this to try out all of the stuff that I have presented in my network videos. 00:00 (tell) Setting the scene, content 00:37 (intro) OneMarcFifty - the place for digital DIY 00:46 (tell) describing the solution 01:53 (show) Installing Virtualbox in Windows 03:45 (show) Installing Virtualbox in Linux 08:40 (tell) enable vt-x in Bios 09:20 (show) configure the LAN in Virtualbox 10:54 (tell) build the 1st router 11:14 (show) Installing the 1st OpenWrt Router 21:07 (tell) Installing 2nd router in LAN 21:47 (show) Installing 2nd OpenWrt Router 27:10 (tell) Adding additional images 28:40 (show) Adding images and setting LAN network 29:35 (tell) Taking Snapshots and reverting How to test scenarios from other videos Home VPN with Wireguard VPN Service / Wireguard VPS 31:33 (show) bridging Ethernet and Wi-Fi into Virtualbox 33:16 (tell) conclusion, call to action, wrap up Links in the video: Virtualization settings Bios : 🤍 VirtualBox download: 🤍 OpenWrt image: 🤍 Ubuntu: 🤍 Debian: 🤍 Windows 10: 🤍 Related videos: Wireguard VPN for home network access on OpenWrt: 🤍 Wireguard VPN on a linux VPS: 🤍 VPN bonding part 1: 🤍 VPN bonding part 2: 🤍 Chat with Marc on Discord - 🤍 Building a home network on a budget: 🤍 Marc on Twitter: 🤍 Marc on Facebook: 🤍 Marc on Reddit: 🤍 Chat with me on Discord: 🤍  Licence-free music on / Lizenzfreie Musik von 🤍 Acknowledgement: The Linux penguin ("tux") is based on an initial suggestion on the linux-kernel mailing list by Alan Cox. The design is by lewing🤍isc.tamu.edu - many thanks !!!

Add OpenWRT into Home Network As One Armed Bypassing Router

894
9
4
00:15:21
31.03.2021

To make better control of my home network, in this video, I shows how to add OpenWRT into home network topology without making changes to existing configuration. You router configuration and topology will mostly be same as before, other than adding one virtual machine and dhcp configuration changes on the wireless router. OpenWRT image will be running in a virtual machine and acting as one-armed router (Router on the stick). In this way, your home wireless router continues providing wireless connection function and acting as gateway connecting to Internet, but all other traffic goes to OpenWRT first before it go out to internet from your Home Wireless Router. Main reason to use OpenWRT is because OpenWRT has thousands of software packages available to enhance the router's function, such as Adblock, DDNS. QoS, VPN, Traffic control, firewall, KMS etc. Related Posts: Install OpenWRT as Single-Arm Router Without Changing Your Home Network - 🤍 Related Videos: Easily Add One-Armed OpenWRT into Home Network As Bypassing Router - 🤍 Install Docker and Portainer on Ubuntu 20.04 in Raspberry Pi - 🤍 Use Portainer to Deploy OpenWRT Docker as router on the stick - 🤍 If you found this video has some useful information, please give me a thumb up and subscribe this channel to get more updates: 🤍 Learning and Sharing - 海内存知己,天涯若比邻 - 🤍

Combine Multiple Internet Broadband Connections Into One Using OpenWrt On Your Existing Router

7426
151
8
00:24:03
23.10.2020

You can install OpenWrt on your existing supported router and connect multiple Broadband / Internet connections and combine it to get: Load Balancing, more speed across your devices, automatic switching when one link fails and prioritising of links. To learn to install OpenWrt on your router visit: 🤍

How to Set up a Separate Guest WiFi Network

6548
61
10
00:04:07
01.03.2021

In this video, we talked about Guest WiFi, why you need it and how to set it up in a few simple steps. For example, we used a Teltonika Networks device - RUT360, but the process should look very similar across most of the products available in the market. 🔴 On 3:38 ports should be: 22 80 443 How to set up a guest WiFi network on RUTX - 🤍 RUT360 - 🤍 Timestamps: 00:00 Intro 00:18 Why you want to set up a Guest WiFi? 00:54 What happens when your WiFI network is not properly secured? 01:15 What happens when you set up a Guest WiFi? 01:32 How to configure devices for Guest WiFi 3:55 Outro „How to“ videos: 🤍 Subscribe to 🤍TeltonikaNetworks: 🤍 Website - 🤍 Wiki - 🤍 Crowd-Support Forum - 🤍 CONNECT WITH US: Subscribe to Our Newsletter - 🤍 Linkedin - 🤍 Facebook - 🤍 Instagram - 🤍 Twitter - 🤍

Exploring OpenWrt - VLAN, Firewall, PortForwarding

20014
63
7
00:16:02
16.08.2019

Just Installed and finally "configured" the opensource firmware I'll show you: 1. Interface (boring) 2. Adding Vlan - Tagged and Untagged (802.1Q) 3. Interface Vlan/sub-interfaces 4. Basic firewall 5. Per Vlan port-forwarding if you dreamed intervlan routing and per Vlan port forwarding at home this video is for you. enjoy

OpenWRT - Guest Wi-Fi on bridged client

11
0
0
00:02:14
13.08.2021

OpenWRT - Guest Wi-Fi on bridged client Helpful? Please support me on Patreon: 🤍 With thanks & praise to God, and with thanks to the many people who have made this project possible! | Content (except music & images) licensed under CC BY-SA 🤍 | Music: 🤍 | Images: 🤍 & others | With thanks to user Stefan (superuser.com/users/160241), user duenni (superuser.com/users/378809), and the Stack Exchange Network (superuser.com/questions/985152). Trademarks are property of their respective owners. Disclaimer: All information is provided "AS IS" without warranty of any kind. You are responsible for your own actions. Please contact me if anything is amiss at Roel D.OT VandePaar A.T gmail.com

openwrt## repeated wifi

157
20
2
00:11:32
15.11.2021

Tutorial OpenWrt in italiano - Creare una rete Lan che spacca!

21880
208
71
00:27:11
23.09.2020

#internet #creativesolutions #networking #lan #Netgear #AC1200 #R6220 La miglior rete LAN, Wireless per casa o ufficio? Condividere la connessione Internet con due o più reti private? Usa apparati compatibili con il firmware 🤍 . Efficiente, economico, flessibile, scalabile e sicuro! Vedremo passo passo come flashare i dispositivi e come configurarli con il firmware OpenWrt: Interfaces, Wireless, Switch, Vlan, Firewall, ecc. 00:00 - Introduzione 03:12 - Hardware utilizzato: Netgear AC1200 (Model: R6220) 04:30 - Scaricare e montare OpenWrt sul dispositivo 08:28 - Schema della rete Lan/Wlan 10:01 - Configurazione router principale (la mente del sistema!) 19:50 - Configurazione router secondario 23:27 - Configurazione altro router secondario 25:04 - Conclusioni

How to set up OpenWRT as an AccessPoint repeating your WiFi SSID

141694
418
48
00:08:46
01.07.2016

Do you have weak spots in your home WiFi? So did I and I decided to fix it on a budget. Here is the how to set up OpenWRT as an AccessPoint repeating your WiFi SSID (repeater mode) using the LuCi web interface. For the demo we use a TP-Link TL-WR1043N/ND v2 which has OpenWRT (Chaos Calmer 15.05 with LuCi 15.05) which is factory reset. I use a mac for the demo, because it was the device giving the most WiFi issues in the house.The default language of the mac is Dutch but the buttons you need to click will be in the same place ;) On my Android phone I use the app Wifi Analyzer to pick the best WiFi frequencies for the router and the various access points.

D-Link DIR-885L LEDE/OpenWRT (Part 1) - Flash & Setup UniFi

13358
00:11:28
23.02.2017

D-Link DIR-885L-A1 LEDE (~OpenWRT) Setup Guide (Part 1) - Flash & Setup UniFi Dual-Band AC3100 Ultra WiFi Router BCM4709C0 2Cores CPU 🤍1.4GHz Part 1 : 🤍 Flash from stock to LEDE (via Recovery Mode), basic setup, UniFi's Internet (Vlan.500) & IPTV (Vlan.600) Part 2 : 🤍 Install packages including Smart Queue Management (SQM) QoS, Wireless setup, Bufferbloat & Jitter/Ping tests Part 3 : 🤍 Setup Guest WiFi Zone (without LAN access)

OpenWRT - File Sharing Server on OpenWRT with Samba4 (SMB)

5887
140
40
00:18:28
09.09.2021

In this video, we will configure File Sharing server on OpenWRT with Samba4 (SMB). For this tutorial, I used a USB 3.0 SSD (USB Attached SCSI device) and connected the hard disk to the USB 3.0 port on the Linksys WRT1900AC to achieve the highest file transferring speed. You can connect the hard disk to a USB 2.0 port but the speed is slower. Besides USB hard disk, a normal USB drive or USB printer will be supported by Samba. Since most of the tutorial on the internet is about Samba 3; I decided to make one for Samba 4. I hope it will help you to get the setup working. Video timeframe: 00:00 - Intro 01:35 - File Sharing with OpenWRT Router Procedure Overview 02:18 - Install Packages - USB Storage, Block-Mount & NTFS support 04:54 - Mont the USB hard drive on OpenWRT with Block-Mount 06:03 - Install Samba4 Server with Putty (CLI) 08:35 - Install luci-app-samba4 & configure Samba4 on LuCI 08:57 - Configure Samba4 on LuCI 11:14 - Create Samba user (Network driver user) 14:56 - Map new Network Drive on Windows 10 & File transfering Speedtest 16:44 - Connect to the Network Drive on Smartphone with Cx File Explore Resources: - Samba Configuration - 🤍 - USB Storage Drivers - 🤍 - NTFS Read & Write support - 🤍 - Block-Mount - 🤍 Thanks for watching and see you in the next video!

OpenWRT and DD-WRT VLAN Tagging and Trunk Setup

54089
77
20
00:06:58
20.10.2014

This brief video shows how to perform VLAN tagging and trunking at home using the inexpensive routers you already have or can find at bargain used prices. These routers have their firmware replaced with OpenWRT or DD-WRT as most stock firmware doesn't support the trunking and tagging features of the hardware. See the companion blog article at 🤍 Buy me a coffee! 🤍 Venmo: 🤍davidcrumpton

OpenWRT - SQM QoS Setup on LuCI

17466
258
78
00:15:35
12.01.2021

In this video, we are talking about Traffic Shaping on OpenWRT, especially SQM and QoS. According to OpenWRT wiki, the OpenWrt SQM-QoS algorithms using cake or fq_codel have nearly eliminated bufferbloat. SQM frequently performs better in all cases - upload and download - than arduous manual QoS settings described below. In this video, we will setup SQM QoS on OpenWRT and configure it according to your internet speed (throughput) and hardware setup. I tried to use Layman terms to explain them, hope it will help to explain the concept of Network Traffic Control and Smart Queue Management better. No matter you are using LuCI or CLI, you just need to install this package: luci-app-sqm Video timeframe: 00:00 - Introduction of SQM QoS on OpenWRT and the basic explanation 02:14 - Install package luci-app-sqm 03:14 - Access Smart Queue Management (SQM) GUI 03:33 - SQM: Basic Settings Tab - Interface, download and upload speed configuration) 04:24 - Measure the internet speed and calculate the download and upload rate for SQM 06:14 - Define the WAN interface for SQM 07:46 - SQM: Queue Discipline Tab - QoS script and Explicit Congestion Notification (ECN) 9:38 - SQM: Link Layer Adaptation Tab - Select the link layer and input the overhead 12:34 - Enable SQM instance and enable SQM startup (at boot) 13:04 - Further SQM QoS tunning Resources: SQM (Smart Queue Management) - 🤍 Lazy to read? SQM Lite version - 🤍 QoS (Network Traffic Control) - 🤍 OpenWRT Traffic Shaping - 🤍 Linux Traffic Control - 🤍

Назад
Что ищут прямо сейчас на
openwrt guest network أفضل هاتف tv online kotlin desde cero взбитые белки samsung vs apple centos vmware react router project булочки افضل هواتف First Person Shooter cem küçük emekli maaş бисквитный торт character set and tokens in Python m31 red light green light squid game бисквит на кипятке Zelda Breath of the Wild The Legend of Zelda Machinima бисквит красный бархат